Toyota Tacoma Seat Belt
Common Culprits behind Toyota Tacoma Seat Belt Problems
The seat belts are probably the most important safety feature on your Toyota Tacoma. They might look plain, but they actually provide a good defense against automobile crashes and accidents. So, if you find hints of corrosion or suspect that the belts are no longer fit to do their job, then better perform some troubleshooting. Listed below are just some of the common problems encountered with Toyota Tacoma seat belts and the reasons behind them.
Uncomfortable seat belt placement
Standard seat belts are meant for individuals of average height, so as a result, taller or shorter people tend to be uncomfortable wearing seat belts. This common problem is easily addressed by adjusting the seat belt placement to your liking. Simply lower the car seat if you are tall or raise it if you are short. When adjusting, keep the top of the belt across the chest and not your neck. In addition, keep the bottom belt over the waist and not your stomach. Keeping these simple measures in mind can greatly help in making your ride with your pickup truck more comfortable.
Twisted seat belts
Another problem encountered with your seat belts is that they can become twisted. This makes it harder to adjust alignment. These twisted belts are not only uncomfortable but also are unsafe because they might strangle you instead of protect you in the event of a collision. It’s a good thing though that they can easily be untwisted manually. If you find it difficult to do so, a silicon lube spray can help ease the process. Luckily, this spray is available in your local auto supply store.
Stuck seat belts
Stuck seat belts are often caused by seat belt aging. You may notice rusts from the belt or latches because they are made of metal. Sometimes, a simple wiggle does the job, but other times, you might need to apply some WD-40 against the lips of the seat belt mechanism.
Other troubleshooting reminders
Do not attempt to fix the seat belts when you are driving the auto. Taking your eyes off the road even for a split-second can be dangerous. Keep in mind that seat belt adjustments are done before driving. If you notice a problem on the seat belts when driving, it is best to park the car first before adjusting the parts.
OEQ Seat Belt
Tips To Keep Your Toyota Tacoma Seat Belt in Good Shape
Having fully-functional seat belts for your Toyota Tacoma can spell the difference between life and death. You see, these belts are probably the most important safety feature of your auto especially in the event of a collision. Because of this, it is highly crucial to keep them in good shape for a safer and worry-free ride. If you are dedicated in keeping safety a priority, follow these seat belt maintenance tips:
Lubricate the lips of the seat belt with WD-40.
If left unmaintained, the seat belt can get stuck in its latch. The belts may have rusted, so there is a greater tendency for them to get stuck. Luckily, you can easily prevent sticking seat belts by regularly applying a WD-40 on the lips of the parts. This should help the lips to glide easily from the latch.
Don’t leave seat belts untwisted.
Although there are no special tools or skills required to untwist a seat belt, the process can become pesky and irritating. Smoothing the seat belt with your index finger and thumb usually does the trick, but other times, this does not work. If this is the case, then simply adjust the clip around the floor bolt. Just follow the seat belt down to the floor bolt for the clip. Adjusting the clip should remove the twists you were not able to untangle.
Tighten the spring inside the seat belt.
To allow the seat belt to retract, keep the springs tightened with a set of pliers. Use the set to turn the spring in a clockwise direction to reel the belt into the coil. In addition, spray lubricant to the part to make its movement smoother.
Avoid eating inside the vehicle.
Eating inside your auto is a big no-no in general, but this might also prove to be much worse when food crumbs are left behind. You see, rodents may find their way inside the auto and gnaw off parts of the seat belts. So, if you want to prevent this from happening, refrain from bringing and eating food inside your auto. If you can’t avoid doing this, then at least find time to clean the auto’s chair and seat belts.